Magtek InSpec 9000 Manuel d'utilisateur télécharger pdf (Page 55)

Section 5. Troubleshooting

5. Rotate the tool 90° downward as indicated in Figure 5-3

Figure 5-3. CET Rotation

6. Pull the tool until the card can be removed as indicated in Figure 5-4. If tool does not

capture the card edge, the tool may be under instead of above the card. Reinsert the tool

and rotate the handle 90

upward.

Figure 5-4. CET Extraction

7 Repeat 3 through 7 until card edge is captured. Pull the tool out until the card can be

removed. Remove the card before removing the tool.

Caution

The card and tool can not be removed together and if forced,

damage may occur to the card, the unit, or the tool.

8. Rotate the tool to the horizontal position and remove it from unit.

9. Turn the power on.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 89 90

Pas de commentaire

Magtek InSpec 9000 Manuel d'utilisateur Page 55