Magtek USB MagnePrint Swipe Reader with Encryption Manuel d'utilisateur télécharger pdf (Page 34)

USB MagnePrint Swipe Reader with Encryption

Get Property Request Data:

Data Offset Value

0 Property ID

Get Property Response Data:

Data Offset Value

0 – n Property Value

Set Property Request Data:

Data Offset Value

0 Property ID

1 – n Property Value

Set Property Response Data:

None

The result codes for the Get and Set Property commands can be any of the codes list in the

generic result code table.

Property ID is a one-byte field that contains a value that identifies the property. The following

table lists all the current property ID values:

Value

HID

mode

Value

mode

Property ID Description

0 0 SOFTWARE_ID The device’s software identifier

1 1 SERIAL_NUM The device’s serial number

2 2 POLLING_INTERVAL The interrupt pipe’s polling interval

3 - MAX_PACKET_SIZE The interrupt pipe’s packet size

4 3 TRACK_ID_ENABLE Track enable / ID enable

- 4 TRACK_DATA_SEND_FLAGS Track data send flags

- 5 TERMINATION_CHAR Terminating char / per track or card flag

- 6 SS_TK2_7BITS Start sentinel char for track 2 – 7 bit data

- 7 Reserved for future use

- 8 SS_TK3_ISO_ABA Start sentinel char for track 3 – ISO/ABA

- 9 SS_TK3_AAMVA Start sentinel char for track 3 - AAMVA

- 10 SS_TK3_7BITS Start sentinel char for track 3 – 7 bit data

- 11 PRE_CARD_CHAR Pre card char

- 12 POST_CARD_CHAR Post card char

- 13 PRE_TK_CHAR Pre track char

- 14 POST_TK_CHAR Post track char

- 15 ASCII_TO_KEYPRESS_CONV

ERSION_TYPE

Type of conversion performed when

converting ASCII data to key strokes

16 16 INTERFACE_TYPE Type of USB interface

- 17 ACTIVE_KEYMAP Selects which key map to uses

- 18 PRE_CARD_STRING Pre card string

- 19 POST_CARD_STRING Post card string

- 20 SS_TK1_ISO_ABA Start sentinel char for track 1 – ISO/ABA

- 21 SS_TK2_ISO_ABA Start sentinel char for track 2 – ISO/ABA

- 22 ES End sentinel char for all tracks/formats

- 35 FS Field Separator for additional data

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 71 72

Commentaires sur ces manuels

Pas de commentaire

Magtek USB MagnePrint Swipe Reader with Encryption Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Magtek USB MagnePrint Swipe Reader with Encryption